Studiologic Sledge 2.0 Manual - Manuale (Pagina 32)

SLEDGE by Studiologic® 32
Before using the SLEDGE
Power connection
Sustain / Expression pedal
Audio output
Headphones
Volume
USB
Use the power chord to connect the instrument to the power
socket. Switch the unit on by using the power switch near to
the power plug on the back of the instrument.
Connect the (optional) sustain pedal PS-100 or VFP 1 at the
socket which is labelled Hold. At the socket labelled Expressi-
on, you can plug in the Studiologic pedal VP 27, which is also
available as an option.
Connect the audio outputs Left and Right with the inputs of
your mixing desk or amplifier.
Plug in your stereo headphones in the dedicated output (if
needed).
When you use the instrument for the first time, we recom-
mend you to turn the Volume knob on the Output section
to not more than half way between 0 and Full. While you are
playing you can adjust the volume as you choose. Adjusting
the Volume knob effects all audio out and headphone out-
puts at the same time.
CAUTION:
To prevent hearing damage you should – as with all audio
devices – avoid using the instrument at high volume for long
periods.
NOTE:
To prevent possible damages to the speaker system, we
strongly reccomand to keep the external mixer or amplifier
volume and the SLEDGE Master Volume at ZERO/MIN when
turning the instrument ON or OFF.
For data transmission via USB, connect the instrument to your
computer with a USB cable. The first time you switch the in-
strument on, it will be recognized by your computer automa-
tically and the appropriate driver will be installed by the OS
(class compliant).