Fast & Fluid LEOLUX NV - Manuale (Pagina 22)

FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
1155495A-it,en - 24/05/07 22
(Fig.35)
Remove the canister lid and place the
proper tool, shown on enclosed picture
(fig. 35), on the top of the canister to be
removed.
(Fig.36)
Turn the tool in anticlockwise direction
until the canister is released (fig. 36).
(Fig.37)
(Fig.38)
Move up the canister until the canister
fasteners will be disengaged and
extract it (fig. 37) out from the rotating
table (fig. 38).
To insert again the canisters in its position, proceed with inverse operating sequence having care
to move the stirring shaft from the top part, in order to centre the bottom part of the stirring
shaft into the relative hole of the rotating table.
To remove the internal canister valve - pump group:
To check the pictures 31, 32, 33, 34, with specifically instructions.