Atlantis Land DiskMaster NASG302D - Manuale (Pagina 49)

ENGLISH
DiskMaster 49
disk can operate independently and is seen as an
individual disk. Therefore, the total capacity of JBOD
is the sum of the capacities of each disk. This allows
the user to add disks until the desired total capacity is
reached. Since JBOD provides no performance
increase and data protection, it is seldom used.
1.10 How to login
To configure your DiskMaster , you will need to use the web browser, enter
the IP address and then use the web configuration for further setup. To find
out the IP address of your device once it is connected to the network, there
are several different ways as described on the following pages.
Use the Setup utility included on the CD. This will list the device
automatically and allow you to access the web configuration interface with
a simple click of your mouse. You may also use the same utility at a later
point to map the network drive after you setup your shares.

Turn on your DiskMaster and make sure it is connected to the same
network as your computer.

Start the Setup utility ( CDRom:\Utility\setupUtil.exe ) by double
clicking on the Setup file and then pressing the Setup button.

Your DiskMaster will automatically show up in the device list, but if not
(click again on
Search Again ), make sure the Setup utility has access
to the network and search again. You might have to configure your
firewall or even temporarily turn it off.

Select your device and click on OK to start the setup wizard.