Touch control panel – Hotpoint Ariston Aqualtis AQS73D 29 EU-A Manuale d'uso

Pagina 7

Advertising
background image

EN

7

7

WASH CYCLE

SELECTOR

knob

Button with

ON/OFF

indicator light

Touch control panel

Button with ON/OFF indicator light: press this briefly to switch
the machine on or off. The green indicator light indicates that the
machine is switched on. To switch off the washing machine during
the wash cycle, press and hold the button for approximately 3
seconds; if the button is pressed briefly or accidentally the machine
will not switch off. If the machine is switched off during a wash
cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR knob: may be turned in either
direction. To select the most suitable wash cycle, please refer
to the “Table of wash cycles”.
The knob will not move during the wash cycle.

M1-M2-M3 buttons: press and hold one of the buttons to
store a cycle with your own set preferences in the memory
of the machine. To recall a previously-stored cycle, press the
corresponding button.

TEMPERATURE

button: press to modify or exclude the

temperature setting; the value selected will appear on the
display above (see “Running a wash cycle”).

SPIN CYCLE

button: press to modify or exclude the spin

cycle; the value selected will appear on the display above (see
“Running a wash cycle”).

DELAYED START

button: press to set a delayed start for

the selected wash cycle; the set delay time will appear on the
display above (see “Running a wash cycle”).

OPTION buttons: press to select the available options. The
indicator light corresponding to the selected option will remain
lit (see “Running a wash cycle”).

WASH CYCLE PHASE icons: these illuminate to indicate the
progress of the wash cycle (Wash

– Rinse

– Spin

Drain

). The text

lights up when the cycle is complete.

START/PAUSE button with indicator light: when the green
indicator light flashes slowly, press the button to start a wash
cycle. Once the cycle has begun the indicator light will remain
lit in a fixed manner. To pause the wash cycle, press the
button again; the indicator light will flash in an orange colour. If

the “LOCK” indicator light is switched off, the door may be
opened. To start the wash cycle from the point at which it was
interrupted, press the button again.

LOCK

indicator light: indicates that the porthole door is

locked. To open the door, pause the wash cycle (see “Running
a wash cycle
”).

CONTROL PANEL LOCK

button with indicator light: to

activate or deactivate the control panel lock, press and hold
the button for approximately 2 seconds. when the indicator
light is illuminated, the control panel is locked (apart from the
ON/OFF button). This means it is possible to prevent wash
cycles from being modified accidentally, especially where there
are children in the home.

ECO indicator light: the

icon lights up when, after altering the

washing parameters, an energy saving of at least 10% is made.
Furthermore, before the machine enters “Standby” mode, the
icon will light up for a few seconds; when the machine is switched
off the estimated energy saving will be around the 80% mark.

CHANGE LANGUAGEsThe first time the machine is
switched on, the first language will flash on the display. The
“ “, “OK” and “V” symbols will appear on the display, in line
with the 3 buttons on the right-hand side. The languages
change automatically every 3”; alternatively, they can be
changed by pressing the buttons next to the “ “ and “V”
symbols. Use the “OK” button to confirm the language, which
will be set after 2”. If no buttons are pressed, the automatic
language change will begin again after 30”.

To change the language, switch the machine on and off
again; in the 30” time period after it has been switched
off, press and hold the temperature

+spin

+delayed start buttons simultaneously for 5’’. A short
sound alert will be emitted and the set language will flash
on the display.

Press the buttons next to the “ “ and “V”

symbols to change the language. Use the button next to the
“OK” symbol to confirm the language, which will be set after
2”. If no buttons are pressed, the language set previously will
be displayed after 30”. Switch on the machine.

TEMPERATURE

button

OPTION

buttons

SPIN

button

DISPLAY

M1

M3

ECO

indicator light

DELAYED START

button

START/PAUSE

button

with indicator light

LOCK

indicator light

WASH
CYCLE
PHASE

icons

CONTROL PANEL LOCK

button with indicator light

M2

Advertising