Start-up and use – Hotpoint Ariston PY 640 T (IX)-HA Manuale d'uso

Pagina 18

Advertising
background image

GB

18

! The position of the corresponding gas burner is
shown on every knob.

Gas burners
Each burner can be adjusted to one of the following
settings using the corresponding control knob:

Off

Maximum
Minimum

To light one of the burners, hold a lit match or lighter
near the burner and, at the same time, press down
and turn the corresponding knob anti-clockwise to the
maximum setting.
Since the burner is fitted with a safety device, the
knob should be pressed for approximately 2-3
seconds to allow the automatic device keeping the
flame alight to heat up.
To light a burner, simply press the corresponding
knob all the way in and then turn it in the counter-
clockwise direction to the "High" setting, keeping it
pressed in until the burner lights.

! If a flame is accidentally extinguished, turn off the
control knob and wait for at least 1 minute before
trying to relight it.

To switch off the burner, turn the knob in a clockwise
direction until it stops (when reaches the “•” position).

Practical advice on using the burners

To ensure the burners operate efficiently:

• Use appropriate cookware for each burner (see

table) so that the flames do not extend beyond the
bottom of the cookware.

• Always use cookware with a flat base and a cover.

• When the contents of the pan reach boiling point,

turn the knob to minimum.

Burner

ø Cookware Diameter (cm)

Reduced Fast (RR)

22 - 24

Semi Fast (S)

16 - 20

Auxiliary (A)

10 - 14

Triple Crown (TC)

24 - 26

To identify the type of burner, refer to the designs in
the section entitled, "Burner and Nozzle
Specifications".

Start-up and use

Advertising