Sp delay time, Display set, Memory guard – Yamaha DSP-AX2 EN User Manual

Page 41: 14 display set, 13 sp delay time, Blue back > auto/off, Osd shift, Dimmer

Advertising
background image

English

39

SET MENU Items

13. SP DELAY TIME

Use this feature to adjust the delay of the Center and the Rear Center channel sounds.
This feature works when this unit decodes DTS or Dolby Digital signals. Ideally, the
Center speaker and the Rear Center speaker should be the same distance from the
main listening position as the left and right Main speakers. However, in most home
situations, the Center speaker or the Rear Center speaker is placed in line with the
Main speakers or the Rear speakers. By delaying the sound from the Center speaker
and the Rear Center speaker, the apparent distance from the Center speaker and the
Rear Center speaker to the main listening position can be adjusted to make it seem the
same as the distance between the left and right Main speaker, and the left and right
Rear speakers to the listening position. Adjusting the delay time for the Center
speaker is especially important for giving depth to the dialogue.

You can adjust the delay time from 0 ms to 5 ms for the Center speaker and
from 0 ms to 30 ms for the Rear Center speaker.

• Increasing the delay 1 ms simulates moving the speakers about 30 cm (one

foot) farther away from the listening position.

14. DISPLAY SET

BLUE BACK > AUTO/OFF

You can set the OSD background to blue if the video source is not being
reproduced (or the power of the source component is off).

OSD SHIFT

This setting is used to adjust the vertical position of the OSD.

DIMMER

You can adjust the brightness of the front panel display.

15. MEMORY GUARD

Use this feature to prevent accidental changes to DSP program parameter values and
other settings on this unit.

Select “ON” to use MEMORY GUARD to protect the following features:

• DSP program parameters

• All SET MENU items

• Front, Rear Center speaker and Subwoofer levels

• The On-Screen Display mode

Notes:

• When MEMORY GUARD is “ON”, you cannot use any of the test modes.

• When MEMORY GUARD is “ON”, you cannot select any other SET MENU item.

14 DISPLAY SET
BLUE BACK……AUTO

14 DISPLAY SET

BLUE BACK………AUTO
OSD SHIFT………………0
DIMMER………………………0

15 MEMORY GUARD

“OFF

ON

15 MEMORY GUARD

>OFF

ON

13 SP DELAY TIME

CENTER………………0ms
REAR CNTR………3ms

13 SP DLY TIME
CENTER………………0ms

Advertising