Additional information 11 – Pioneer VSX-D714 Manuale d'uso

Pagina 70

Advertising
background image

Additional information

11

70

En

Broadcast stations cannot be
selected automatically.

• Connect an outdoor antenna (refer to page 20).

No sound from surround or
center speakers.

• Refer to

Speaker setting

on page 42 to check the speaker settings.

• Refer to

Manually calibrating your listening area (MCACC)

on

page 48 (with the VSX-D814, you can do this using the

Quick

surround sound setup

on page 13) to check the speaker levels.

• Connect the speakers properly (refer to page 21).

No sound from surround
back speakers.

• Refer to

Surround back speaker setting

on page 43 to check the

surround back speaker settings.
• Refer to

Manually calibrating your listening area (MCACC)

on

page 48 (with the VSX -D814, you can do this using the

Quick

surround sound setup

on page 13) to check the speaker levels.

• Refer to

Using the Surround Back Channel (SB CH)

on page 37 to

make sure the

SB CH MODE

and the sound mode are set for

surround back sound.

No sound from subwoofer.

• Make sure the subwoofer is switched on.
• If the subwoofer has a volume knob, make sure it’s turned up.
• Switch the

Subwoofer setting

on page 43 to

YES

or

PLUS

.

• Switch the

LFE attenuator setting

on page 44 to

0 dB

or

10 dB

.

• The Dolby Digital or DTS source you are listening to does not have
an LFE channel.

Noise during playback of a
cassette deck.

• Move the cassette deck further from your receiver, until the noise
disappears.

Sound is produced from
other components, but not
from LD or DVD player.

• Set the

SIGNAL SELECT

to

AUTO

,

DIGITAL

or

ANALOG

according to the type of connections made. (refer to page 36).
• Set the digital input settings correctly (refer to page 46).
• Make digital connections (refer to page 16) and set the

SIGNAL

SELECT

to

DIGITAL

(refer to page 36).

• Refer to the instruction manual supplied with the DVD player.

No sound is output or a noise
is output when software with
DTS is played back.

• Set the digital volume level of the player to full, or to the neutral
position.

When a search is performed
by a DTS compatible CD
player during playback, noise
is output.

• This is not a malfunction, but be sure to turn the volume down to
prevent the output of loud noise from your speakers.

Problem

Remedy

VSX_714_814.fm 70 ページ 2004年1月28日 水曜日 午前10時18分

Advertising