IBM T 55A - Manuale (Pagina 26)

20
Power Management
To benefit from power management, the monitor must be used in conjunction
with a computer that implements the Video Electronics Standards
Association (VESA) Display Power Management Signalling (DPMS)
Standard.
The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable period.
There are several states as described in the table below.
As an E NERGY S TAR
®
Partner, IBM has determined that this product meets the
E NERGY S TAR
®
guidelines for energy efficiency.
IBM recommends that you switch off your monitor at the end of each working
day, or whenever you expect to leave it unused for long periods during the
day.
‡ There may be a slight delay before the picture reappears.
State
Power
Indicator
Screen
Restoring
Operation
Compliance
On Steady green Normal
DPMS
Standby
Steady amber Blank
Press a key or
move the mouse.
E NERGY S TAR
®
and NUTEK
DPMS
Suspend
Flashing
amber
(0.5 sec.
interval)
Blank
Press a key or
move the mouse. ‡
E NERGY S TAR
®
and NUTEK
DPMS Off
Flashing
amber
(1 sec.
interval)
Blank
Press a key or
move the mouse. ‡
E NERGY S TAR
®
and NUTEK
If your computer has
previously been used with a
CRT monitor and is currently
configured to a display mode
outside the range that the Flat
Panel monitor can display, you may
need to re-attach the CRT monitor
temporarily until you have re-
configured the computer,
preferably to 1024 x 768 at 60Hz.
T55A.book Page 20 Wednesday, September 16, 1998 10:32 AM