Prior in1’ and ‘mute in1’ commands – RCF UP 2082 Power Amplifier (2 Channel, 2 x 80W) Manuale d'uso
Pagina 8
8
ENGLISH
7
GAIN control of the amplifier A input 2 (only).
8
Amplifier A TREBLE tone control.
9
Amplifier A BASS tone control.
P
Amplifier B audio inputs and commands (removable connector).
See
6
‘Amplifier A audio inputs and commands’ for connections.
{
GAIN control of the amplifier B input 2 (only).
}
Amplifier B TREBLE tone control.
q
Amplifier B BASS tone control.
w
Amplifier A output (UP 2082: max. 80 W, UP 2162: max. 160 W) to loudspeakers
(100 / 70 V constant voltage line – 4
Ω
impedance).
Use 1 output only (read the section ‘Loudspeaker connection’).
e
Amplifier B output (UP 2082: max. 80 W, UP 2162: max. 160 W) to loudspeakers
(100 / 70 V constant voltage line – 4
Ω
impedance).
Use 1 output only (read the section ‘Loudspeaker connection’).
r
Amplifier B fuse.
t
Amplifier A fuse.
t
he
proper
fuse
types
are
marKed
on
the
rear
panel
(
Below
the
amplifier
a
fuse
t
).
y
Connector for the power cable.
When no command is activated, the inputs 1 and 2 are both open.
t
he
volume
of
the
music
source
(
e
.
g
. cd
player
,
tuner
,
etc
.)
connected
to
the
input
2
also
depends
on
its
respective
gain [
7
/
{
]
control
on
the
rear
panel
.
When the ‘PRIOR.IN1’ priority command is activated, the input 2 is muted.
When the ‘MUTE IN1’ command is activated, the input 1 is muted.
t
he
‘prior.in1’
command
overrides
the
‘mute in1’
one
.
‘PRIOR IN1’ AND ‘MUTE IN1’
COMMANDS