Proel PLFD900EL - Manuale (Pagina 6)

6
4.2.1: Manual control:
After finished heating up, pressing button ENTER make smoke spraying as long as you want. If you want
to stop spray just stop press button ENTER.
4.2.2: Timer control:
Please press button FUNC to choose the setting what you want and then press button of “ENTER” to
confirm.
To increase or decrease to choose output time and stop time, please adjust values from pressing the
buttons UP / DOWN.
Press ENTER to save the settings.
A. Stop time setting instructions:
Press FUNC button ENTER ENTER Stop time
Set stop output time to confirm to to confirm set
C. Output time setting instructions:
Press FUNC button ENTER ENTER Output
Set output time to confirm to to confirm set
To stop output smoke, just press UP key for one second to exit output state, the machine into standby and
LED display shows .
When the machine working on setting stop time and output time, the LED display will show count down with
setting time.
The output time depends from the heating level of the machine: if the heating level of the machine is not very
high, it is possible that the time is lower than the time set on the display.
5. Maintaining:
•
Please clean the machine clearing you regularly, it will reduce spare parts replacing and repairing
expenses.
•
Please clean dust in the heat-proof tube by 20% vinegar and the 80% distilled water after the machine
running 40 hours.
•
Take out the fog liquid out, and refill the above cleanings, contact power supply then warm up machine.
•
High quality fog liquid is suggested. All smoke machines will be jammed or pump damaged by the no
good fog liquid or duty fog liquid. If so, maintains will not available.
•
Please clean machine by dry cloth, and story it under clean condition.
6. Operation notice:
•
All smoke machines have condensation function, before setting the machine, please considerate whether
spraying nozzle condense the water vapor or dampness around.
•
Occasionally the smoke machines will have a little smoke output during/after working.
•
Normally, less vapor or smoke may happen when the machine working first time.
WARNING!!
1. Before using this product please read the operation instruction first, we will not responsible
for any wrong operation.
2. We have the rights to refuse repairing, if the machine breaks down for without using liquid
of our company.
3. The smoke machine has some certain of risk under high temperature working, do not open
the machine box personally, or free after-services will be not available. Consequences will
bear by yourself.
4. Please keep accessories well, we will not provide spare parts for free if lost.
5. The smoke machine’s spare parts are based on weak current working, please do not use
them in the smoke machine of other brand.