Atlantis Land A02-PL301 - Manuale (Pagina 25)

ENGLISH
A02-PL301 26
This Quick Installation Guide will help you to quickly and easily install your
Powerline Ethernet AV Adapter. For more detailed instructions, please refer
to the on-line manual.
1.1 Introduction
HomePlug AV utilizes the existing electrical wiring in the house as a path to
create a secured network of computers and Ethernet devices. With a
maximum data rate of up to 200 Mbps, NetPower 301AV can reliably
handle high requirement applications like broadband Internet, high definition
video streaming, and Voice over IP.
HomePlug AV converts digital signals to a complex analog signal that
traverses along the electrical wires. When receiving the analog signal,
HomePlug AV converts the analog signal back to digital. To make the signal
secured, a 128-bit AES encryption is applied.
A HomePlug AV device can only communicate with other HomePlug AV
devices that use the same Private Network Name. The Private Network
Name can be changed manually using the HomePlug AV Utility software on
a computer with a Windows operating system. When you use the software,
you have to manually type the Private Network Name for the device.
Another way to change the Private Network Name is to use the Simple
Connect button . Simple Connect automatically creates an encrypted
Private Network Name. It can also be used to reset the Private Network
Name or to add a device into an existing HomePlug AV network.
When a HomePlug AV communicates with another device, the Powerline
Activity LED color will give you an idea about the connection rate: red
means below 40 Mbps; amber means 40 to 105 Mbps; and green means
more than 105 Mbps.