Atlantis Land NET CAMERA A03-IPCAM-W54 - Manuale (Pagina 2)

PRODOTTO:
CODICE:
CODICE EAN:
IPCam
NetCamera
I dati possono essere cambiati senza preavviso
A0
2-
IP
C
AM
2-
W
54
_S
I_
06
5
A
tlAntis
l
And
S.p.A. - Viale De Gasperi 122
20017 Mazzo di Rho - Milano - ITALY
Phone: +39 - (0)2 - 93.90.60.85 Fax: +39 - (0)2 - 93.90.61.61
Web: www.atlantis-land.com
E-Mail: [email protected]
NetCamera
A02-IPCAM-W54
8026974009537
CARATTERISTICHE TECNICHE
Video specification
Resolution: 640 x 480 pixel
Sensor: color CMOS sensor
Gain control: Automatic
Exposure: Automatic
White Balance: Automatic
Focal Length: 6.0 mm
Aperture: F=1.8
Focus Extent: 20 cm - ∞
Lens mounting: Fixed board lens
Image (Video Setting)
Image compression: JPEG
Frame rate: QCIF@30fps,25fps@CIF, 10fps@VGA
Compression Rate selection: 5 levels, very low, low, middle, high, very high
Frame rate setting: 1, 5, 7, 15, 20, auto (depends on the video format)
Video resolution: 160x120, 320x240, 640x480
Brightness control: Range 1-128
Contrast control: Range 1- 128
Saturation Control
Digital Zoom: (4X)
Upside down and Mirror
Hardware Interface
LAN Connector: One RJ-45 port to connect to 10/100Mbps Ethernet, auto-sensed
Wireless LAN: Built-in 802.11g (Wi-Fi compliant) wireless LAN module
LED Indicator: Power LED (Blue), Link LED (Orange)
Power Supply: DC 5V, switching type
Power Communication: 5 Watt (1000mA x 5V)
Antenna Connector: 1 connectors (Reverse-SMA)
Communication Support
Communication: 10/100Mbps Ethernet and 802.11g wireless LAN.
Encryption: WAP-PSK, WEP 128 bit, WEP 64 bit or OFF
Communication protocol: HTTP, FTP, TCP/IP, UDP, ARP, ICMP, BOOTP, DHCP, PPPoE
System
CPU: RDC R2880
RAM: 8M Byte
Flash ROM: 2M Byte
OS: RTOS
Browser Support
System requirement
CPU: Pentium III, 700 MHz or above
Memory Size: 64 MB (128 MB recommended)
VGA card resolution: 800x600 or above
Internet Explorer 5.0 or above (ActiveX Mode –View Image supports Internet Explorer
under Windows OS)
Netscape 6.0 or above
IPView SE Application
Support OS: Win 98 SE, Win 2000, Win Me, Win XP
System requirement for IPView:
CPU: Pentium III, 700 MHz or above
Memory Size: 128 MB (256 MB recommended)
VGA card resolution: 800x600 or above
Powerful application software for image capture and video recording
- Multiple Video Window Simultaneously
- Motion Detection with alert and E-mail sending.
- Recording triggered by Motion Detection, Schedule, and Manual.
- Single Frame Image Snap shot
Operating environment
Operating temperature: 5°C ~ 40°C
Storage temperature: -25°C ~ 50°C
Humidity: 5% ~ 95% non-condensing
Package Contents
One IP Security Wireless Camera
One Quick Installation Guide
One External Antenna (2.2 dBi)
One Installation CDRom with IPView SE
One Camera Stand
One DC Power Adapter
One RJ-45 Ethernet Cable
NetCamera
IP Security
Wireless Camera