Brother HL-8050N - Manuale (Pagina 11)

X
Safety Information
IMPORTANT - For Your Safety
To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power
outlet/socket which is properly grounded/earthed through the normal standard wiring.
Extension cords should not be used with the equipment. If it is essential that an extension cord has to be used, it
must be a three-pin plug type and correctly wired to provide proper grounding/earthing. Incorrectly wired extension
cords may cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the power is grounded/earthed and that the
installation is completely safe. For your safety, if in any doubt about the effective grounding/earthing of the power,
call a qualified electrician.
Questo prodotto deve essere collegato a una presa di corrente c.a di portata compresa nell'intervallo indicato
sull'etichettà. NON collegare ad alimentazione c.c. In caso di dubbi, contattare un tecnico qualificato.
Disconnect device
This printer must be installed near an AC power outlet/socket that is easily accessible. In case of emergencies, you
must disconnect the power cord from the power outlet/socket to shut off the power completely.
Caution for batteries
Do not replace the battery. There is a danger of explosion if the battery is incorrectly replaced. Do not disassemble,
recharge or dispose of in a fire. Used batteries should be disposed of according to local regulations.
LAN Connection
Caution: Connect this production to a LAN connection which is not subjected to over-voltages.