Brother HL-3260N - Manuale (Pagina 21)

xvii
Disconnessione del dispositivo
Questa stampante deve essere installata nei pressi di una presa di
corrente facilmente accessibile. In caso di emergenza, disinserire la
spina dalla presa di corrente e spegnere del tutto l'apparecchiatura.
Geräuschemission / Acoustic Noise Emission (solo per la Germania)
Lpa < 70dB (A) DIN 45635-19-01-KL2
Wiring Information (solo per il Regno Unito)
Important
If the mains plug supplied with this printer is not suitable for your
socket outlet, remove the plug from the mains cord and fit an
appropriate three pin plug. If the replacement plug is intended to take a
fuse then fit the same rating fuse as the original.
If a moulded plug is severed from the mains cord then it should be
destroyed because a plug with cut wires is dangerous if engaged in a
live socket outlet. Do not leave it where a child might find it!
In the event of replacing the plug fuse, fit a fuse approved by ASTA to
BS1362 with the same rating as the original fuse.
Always replace the fuse cover. Never use a plug with the cover
omitted.
WARNING - THIS PRINTER MUST BE EARTHED