Atlantis Land DiskMaster NASG501D - Manuale (Pagina 39)

ENGLISH
DiskMaster 39
3 RESET
After the device has turned on (turn on the
power and wait 3 minutes), press and hold
reset button for 5 seconds, then release it
to reset it (this is used when you can not
login to the DiskMaster, e.g. forgot the
password.
4 POWER(ON/OFF)
Press the power switch to start/shutdown
the DiskMaster. It will take approximately 3
minutes to boot up/and shutdown the
Operating System.
5 POWER (jack)
Connect the supplied power adapter to
this jack.
Leave at least 10cm of space at the rear of the device
for ventilation.
1.8 Default Settings
The TCP/IP protocol stack and Ethernet network adapter must be installed.
If not, please refer to MS Windows relative manuals.
Before you configure this device you need to know the following default
settings:

Username : admin

Password: admin

IP address: 192.168.1.10

Server name: NAS