Teka EM 30 2P - Manuale (Pagina 17)

GB
17
* The electric hotplates should be cleaned
using soapy water and a non-abrasive
scourer. If, after cooking, you notice that
the electric hotplate’s stainless steel rim
or the cooker’s surround are yellowing
slightly, you can counter this by using
lemon, vinegar, dilute amonia or any
product containing dilute ammonia.
* If liquids spill onto the hotplate, they
should be quickly removed using a
cloth. Never leave them to be burned on
the hotplate, for this will reduce heat
transmission considerably.
* If the hotplate is not going to be used for
some time, it should be oiled so that the
surface shines and rusting is avoided.
* Remember that the hotplate will have a
longer life if, where possible, moisture
and excessive temperatures are avoided.
* Steam-based appliances should not be
used to clean the hob.
Do not clean the hotplates while
they are still hot.
Operating the glass
ceramic hotplates
The glass ceramic hob’s hotplates are
controlled by a switch with seven posi-
tions. To get different levels of power, all
you need to do is to turn the appropriate
knob and set it to the position you want.
The pan should be placed on the hotplate
before ignition.
The power corresponding to each of the
switch’s positions is as follows:
Residual heat indicator
When a heating area reaches a tempera-
ture of more than 60±15ºC the correspon-
ding residual heat indicator comes on, and
stays on even if the control
is set to zero until the temperature drops.
However, care should always be taken
with the temperature of the cooking area
because there is a possibility, albeit remo-
te, that the indicator will fail and that the
temperature in that area will not be shown.
There is an indicator light on the same
control panel that shows whether one or
more hotplates are in operation.
Rectangles marked on the control panel
show which hotplate each control is linked to.
Model VM/30 2P T has a further control, a
timer, which limits the degree to which the
1200 W hotplate.
Power Control set to
1700 W hotplate.
Power Control set to
Switched off
180 W
290 W
470 W
760 W
1230 W
1700 W
0
1
2
3
4
5
6
Switched off
130 W
206 W
350 W
500 W
850 W
1200 W
0
1
2
3
4
5
6