Italiano, English, Guida d’installazione rapida – Acer P3251 Manuale d'uso

Pagina 2: Quick start, Installazione, Connettore interfaccia, Installation, Interface connector

Advertising
background image

Italiano

INSTALLAZIONE

Connessione a un computer

1. Accertarsi che il proiettore e il

computer siano accesi.

2. Collegare un’estremità del cavo

VGA al “VGA IN” per computer del

proiettore, collegare l’altra estremità

al connettore VGA sul computer e

serrare le viti.

3. Collegare un’estremità del cavo di

alimentazione alla presa di corrente

CA del proiettore, collegare l’altra

estremità a una presa a muro.

Accensione del proiettore

1. Rimuovere il coperchio dell’obiettivo.
2. Accendere prima il proiettore e poi il

computer.

3. Regolare la posizione, la messa a

fuoco e lo zoom.

4. Eseguire la presentazion.

Spegnimento del proiettore

1. Premere due volte il pulsante di

accensione.

2. Non rimuovere il cavo di alimentazione

CA dalla presa di corrente finché la

ventola del proiettore non si ferma.

CONNETTORE INTERFACCIA

GUIDA D’INSTALLAZIONE

RAPIDA

Nota: L’interfaccia del connettore è soggetta alle specifiche del

modello

1. Cavo d’alimentazione
2. Cavo VGA
3. Cavo video composito
4. Cavo audio Jack/Jack
5. Cavo USB
6. Cavo HDMI
7. Cavo S-Video
8. Cavo audio Jack/RCA
9. Scheda SD
10. Disco/Penna USB

English

INSTALLATION

Connecting to a Computer

1. Ensure the projector and your

computer are turned off.

2. Connect one end of the VGA cable

to the “VGA IN” connector on the

projector; connect the other end to

the VGA connector on the computer

and tighten the screws.

3. Connect one end of the power cord

into the AC power socket on the

projector; connect the other end to an

electrical outlet.

Powering On the Projector

1. Remove the lens cap.

2. Turn on the projector first and then

the computer.

3. Adjust the position, focus and zoom.

4. Run you presentation.

Powering Off the Projector

1. Press the power button twice.

2. Do not remove AC power cord from

outlet until the projector fan shut

down.

INTERFACE CONNECTOR

Quick Start

Note: Connector interface is subject to model’s specifications

1. Power Cord
2. VGA Cable
3. Composite Video Cable
4. Audio Cable Jack/Jack
5. USB Cable
6. HDMI Cable
7. S-Video Cable
8. Audio Cable Jack/RCA
9. SD card
10. USB disk/stick

Advertising