Yamaha RX-V395RDS - Manuale (Pagina 18)

18
For Control of This Unit
~
DELAY/CENTER/REAR/SWFR and TIME/LEVEL +/–
keys
Adjust the delay time (DELAY), the center channel output level
(CENTER), the rear channel output level (REAR) and the
output level to the SUBWOOFER OUTPUT terminal (SWFR).
Select the item which you want to adjust by pressing the
DELAY/CENTER/REAR/SWFR key and adjust the time or
level by pressing the TIME/LEVEL +/– key. (Refer to pages 25,
37 and 38.)
Ÿ
Tuner keys
Use to tune stations or to select a preset station.
PRESET +: Selects higher preset station number.
PRESET –: Selects lower preset station number.
A/B/C/D/E: Selects the group (A-E) of preset station numbers.
!
SLEEP timer key
Use to turn the built-in SLEEP timer on and off, and to set the
SLEEP time. (Refer to page 39.)
⁄
POWER /I key
Turns the power to this unit on and puts this unit into the
standby mode alternately.
@
VOLUME +/– keys
Turn the volume level up and down.
¤
Input selector keys
Use to select the input source.
When the TV/DBS or DVD/LD input source is selected,
pressing the same key (TV/DBS or DVD/LD) switches the input
signals between 2 channel stereo signals and 6 channel
discrete signals. When switched to “6ch”, discrete signals from
the unit connected to the 6CH DISCRETE INPUT terminals of
this unit are selected as the input signals.
#
Program selector keys
PROGRAM:
When the built-in digital sound field processor (including the
Dolby Pro Logic Surround decoder) is on, this key changes the
currently selected DSP program whenever the right or left side
of this key is pressed.
PROLOGIC:
Directly selects the PRO LOGIC program.
ENHANCED:
Directly selects the
PRO LOGIC ENHANCED program.
‹
EFFECT ON/OFF key
Switches the digital sound field processor on and off (including
the Dolby Pro Logic Surround decoder). (Refer to page 36.)
$
TEST key
Used for speaker balance adjustment. (Refer to pages 19–21.)
For Other Component Control
Identify the remote control transmitter keys with your
component’s keys. If these keys are identical, their functions
will be the same. For each key function, refer to the instruction
manual supplied with the appropriate component.
1
Tape deck keys
Use to control a cassette deck.
* DIR A, B and A/B are applicable only to double
cassette tape deck.
* For a single cassette deck with automatic reverse
function, pressing DIR A will reverse the direction of
tape running.
2
CD player keys
Use to control a compact disc player.
* DISC is applicable only to a compact disc changer.