VDO M4WL - Manual (Page 29)

29
M4 WL
Settings – start altitude
Once the correct start altitude has been set,
confirm the setting by pressing the
SET button.
The response “Set OK” appears on the display.
If you want to configure further settings,
press the
BIKE or ALTI button to access these.
If you do not want to configure any further settings,
press and hold the SET or BIKE button.
The settings menu closes.
The VDO M4 WL returns to function mode.
Settings – current altitude
Further to the two start altitudes, it is also possible to set the
current altitude.
This is necessary, for example, if you start your trip from a lo-
cation other than one of the two start altitudes. Also reset the
current altitude if the weather has changed during a trip and
the current altitude displayed on the M4 WL does not match
the altitude information displayed on a road sign, for instance.
How to set the current altitude:
Press and hold the SET button until the settings menu
opens.
Press the
BIKE button to move from Totals to Settings.
Press the SET button to open the settings.
“Language” appears on the display.
Press the BIKE or ALTI button to scroll to the setting
for the Actual Alti (current altitude).
Press the SET button to start the settings.