Rockwell Automation 140G-HTx_J-HTx LSI-LSIG Adjustment Instructions - Manuale (Pagina 4)

9
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
DIR 1000721R0506 (L5086)
Publication 140G-IN100A-MU-P - April 2013
Change battery
Sostituire batterie
Batterie ersetzen
Remplacer batteries
Sustituir baterías
PROCEDURA DI CONTROLLO
- CONTROLLO LED:
tutti i led del relè si
devono accendere
- ULTIMA INDICAZIONE DI TRIP:
se presente nella memoria
del relè
- LED:
resta acceso finchè
è connessa al relè
- PRONTO PER TRIP
140G-ELTT
Tester
1
Green
Verde
Grün
Vert
Verde
Red
Rosso
Rot
Rouge
Rojo
Device ON
Dispositivo acceso
Einrichtung eingeschaltet
Dispositif allumé
Dispositivo encendido
CLACK
4
3
2
DIAGNOSTIC PROCEED
- UNIT CHECK LED:
all the leds in the relay
must come on
- LAST TRIP INDICATION:
if present in the relay's
data store
- LED: remains on for
as long as the 140G-ELTT
Tester is connected to
the relay
- READY TO TRIP DIAGISTIKABLAUF
- EINEITHSPRUF-LED:
Alle LEDs des Relais müssen
aufleuchten
- ANGABE DER LETZTEN AUSLOSUNG:
Wenn im Speicher des Relais
vorhanden.
- LED: Bleibt angeschaltet,
bis die Einheit
an die Relais angeschlossen ist.
- AUSLOSEBEREIT
140G-ELTT Tester
PROCEDIMIENTO DIAGNOSTICO
- LED CONTROL UNIDAD: todos los
led del relé se deben
encender
- INDICACION ULTIMA ACTUACION:
si está presente en la memoria
del relé
- LED: queda encendido
mientras la
permanezca conectada con el relé
- LISTO PARA LA ACTUACION
140G-ELTT Tester
PROCÉDURE DE DIAGNOSTIC
- UNIT CHECK LED : toutes les
diodes du relais doivent
s'allumer
- LAST TRIP INDICATION :
si présente dans la mémoire
du relais
- LED: la DIODE reste
allumée tant que
est connectée au relais
- READY TO TRIP
140G-ELTT
Tester
TRIP
LED TRIP TEST DEVICE
140G-ELTT