Pioneer DV-220V-K - Manuale (Pagina 20)

En 20
<J2M10921B> 20
Problem Check Remedy
Power is not supplied to the USB
device. Is Err displayed on the front panel dis-
play? No power is supplied if the power
consumption is too high. Turn the power off then back on.
Turn the power off, then disconnect and reconnect
the USB device.
Press DVD/ USB to switch back to the DVD mode,
then switch again to the USB mode. (When the
input is switched back to the DVD mode, LOAd is
displayed on the front panel display and the disc
is recognized. When the input is switched back
to USB, USb is displayed on the front panel display.)
If the USB device is equipped with an AC adapter,
use the USB device with the AC adapter connected.
Audio CD tracks cannot be recorded
on a USB device. Is there enough free space on the USB
device? Recording is not possible if there is not enough free
space left on the USB device. In this case, Available
USB space is low is displayed.
Are there 300 or more folders on the
USB device? Recording is not possible if the USB device con-
tains 300 or more folders.
Are there already 99 PIONEER folders
on the USB device? Recording is not possible if there are already 99
PIONEER folders on the USB device.
When connected to an HDMI-compatible device
(DV-220V-K only)
Problem Check Remedy
Picture is not displayed. Is the resolution properly set? Set HDMI Resolution properly for the connected
device (page 15).
Restore HDMI Resolution to the default setting
(720x480p/ 720x576p) (page 15).
Is the HDMI cable properly connected? Connect the cable securely (all the way in).
With some cables, 1 080p video signals will not be
output.
Sound is not produced or is dis-
torted. Is HDMI Out properly set? Set HDMI Out to LPCM (2CH) or Auto (page 14).
Multichannel audio signals are not
output. Is HDMI Out properly set? Set HDMI Out to Auto (page 14).
Colors are not properly displayed on
TV screen. Is HDMI Color properly set? Change the HDMI Color setting (page 15).