Pioneer VSX-D512-S - Manuale (Pagina 27)

Playing sources 05
27
En
Expanded
This mode is especially designed to give sound
depth to stereo sources. The overall effect
builds a dynamic and broad sound space,
allowing two-channel (stereo) signals to imitate
a five speaker sound. Use with Dolby Pro Logic
for a stereo surround effect. You can also use
with Dolby Digital sources for a wider stereo
field than the Standard modes.
5-Channel Stereo
This can be selected to give multi-channel
sound to a stereo source, using all the speakers
in your setup.
Choosing the input signal
You need to hook up a component to both
analog and digital inputs on the back of the
receiver to select between input signals.
DOWN
STEREO/
DIRECT
SIGNAL
SELECT
UP
ENTER
INPUT
SELECTOR
MASTER VOLUME
MULTI JOG
MONITOR
MULTI JOG
MIDNIGHT LOUDNESS TONE QUICK SETUP
• Press SIGNAL SELECT (front panel) to
select the input signal corresponding to the
source component.
Each press switches between
AUTO, DVD 5.1
ch, ANALOG and DIGITAL. The default is
AUTO.
When set to DIGITAL, 2 DIGITAL lights when
a Dolby Digital signal is input, and DTS lights
when a DTS signal is input.
• DVD 5.1 ch is only available when DVD/
LD is selected as the source.
• This receiver can only play back Dolby
Digital, PCM (32kHz, 44kHz, 48kHz, and 96
kHz) and DTS digital signal formats. With
other digital signal formats, set to
ANALOG.
• You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 13) and set
the signal input to
DIGITAL.
• Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your DVD
player.
• You can only select DIGITAL if the source
you selected is assigned to a digital input.
See page 34–35 for more on the digital input
settings.
Using Stereo/Direct
When you select STEREO or DIRECT, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo. See the previous page for
more on these modes.
• Press STEREO (STEREO/DIRECT on the
front panel) repeatedly to switch between
the two options.
If you switch on Midnight listening, Loud-
ness, or the Tone controls when
DIRECT is
selected, the receiver automatically switches
to
STEREO.
XRE3068A.En.26.30 03.2.3, 11:10 AM 27