Atlantis Land 300 - Manuale (Pagina 35)

MULTILANGUAGE MANUAL
NetFly 300 35
3. HARDWARE INSTALLATION
3.1 LED Indicator
Link
The Link LED indicator lighted green when the NetFly 300 Wireless
Adapter is connected to wireless network successfully.
3.2 Check the installation
The LEDs of the Wireless LAN Adapter are clearly visible and the status of
the network link can be seen instantly:
1. Once the device is plugged to the station’s USB/PCI slot, the LED
of the Wireless LAN Adapter will light up indicating a normal
status.
2. While the Wireless LAN Adapter linked up and transmitting data to
the Access Point or to other Wireless LAN station, the Link LED
will lighted green.
4. SOFTWARE INSTALLATION
This section will lead you to install the driver and utility of the Wireless LAN
Adapter.
4.1 Utility and Driver Installation
1. Insert the CD-ROM and the Auto-run program will appear.
Alternatively, open a file browser and double click on the
autorun.exe file located in the CD directory. In some specific
setting on Windows system, you may need to proceed the
software manually, go to your Windows Start menu and choose
Run, type “D:\PCI\Setup.exe” or “D:\USB\Setup.exe”in the dialog
box and click OK.
Note: (D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using).
2. If you need to install the driver manually, refer each Windows OS
to the following CD-Rom directory path: D:\PCI\Driver\<Windows
OS> or D:\USB\Driver\<Windows OS>.
Note: (D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using).
3. Click on “A02-UP-W300N” icon or “A02-PCI-W300N” to select
NetFly PCI/USB Home Page.