Samsung DTB-B570 - Manuale (Pagina 41)

GB-35
DTB-B570E
GB
TROUBLESHOOTINGS
GB-34 D I G I T A L T E R R E S T R I A L R E C E I V E R
DTB-B570E
AVAILABLE TV MANUFACTURER NUMBERS
The device, packaging material (e.g. Styrofoam) and the batteries must never be
disposed of with household refuse. Please obtain appropriate information about the
regulations in your community, and dispose of all refuse in accordance with regulations
at the separate locations provided.
N No otte e : In order to control this product with your
existing Samsung TV Remote control,
you must input Code 014 into the TV
Remote control to make it work.
DISPOSAL
In some region, the digital terrestrial signal may be weak.
So you’d better use the antenna in which the booster was built, for watching the weak signal
channels.
You can download and upgrade the system software of the receiver through a specific channel
through a specific channel designated by the broadcaster. The Distributor will provide you with more
information about that.
Problem Possible cause Solution of the problem
No display LED on Power cord Power cord plug in correctly
the front panel; not plugged in correctly
No power supply
No pictures on the screen Receiver in Standby mode; Set receiver to “On”;
SCART not connected tightly Check connection;
to video output of television;
incorrect channel or video
Check channel and video output
output selected on television (TV instruction manual)
No sound SCART connected incorrectly; Check connection;
Volume level = 0; Increase Volume on television set;
Muting active Press the MUTE key
Remote Control does not Incorrect operation; Point remote control
operate directly towards the Receiver.
Batteries dead or inserted Replace batteries or insert correctly
incorrectly
Poor picture quality Signal strength too low Check all wire connections.
signal strength in
On-Screen Error Messages: Antenna cable not connected Check connection and correct;
“Searching for signal” or not tight;
incorrect position of the
Check position and correct antenna;
Check the signal strength in
the “Installation” menu
On-Screen Error Message Receiver not yet set Scanning of in “Installation” menu
“Channel data does not
exist.”
0DNHU %5$1' 1$0( &2'(180%(5 ',*,7 /,67
75$.721 
75$16&217,1(16  
75$1621,&  
75$167(& 
75,'(17 
75,67$5 
75,803+   
8+(5    

8/75$ 
8/75$92;   
 
81,&/,1(  
81,7('  
81,9(5680   
  
 
 
81,92;  
87$; 
9(*$92; 
9(67(/  
9(;$  
9,&725 
9,'(26<67(0  
9,'(2/2*,48( 
9,'(26$7 
9,'(26<67(0  
9,'(27(&+1,& 
9,'(2721 
9,',.521 
9,'7(&+ 
9,3(5 
9,6,2/$ 
9,6,21  
9,625(; 
9,67$5 
92/7(& 
9257(& 
92;621   

:$/7+$0   
:$7621   
:$775$',2   

:(*$   
:(*$&2/25 
:(*$92;  
:(/7%/,&. 
:(67,1*+286(  
:(6721 
:+$5)('$/(  
0DNHU %5$1' 1$0( &2'(180%(5 ',*,7 /,67
:+,7( 
:+,7(:(67,1*+286(   
:,1&2

:,1'67$5 
;5<3721  
<$0,6+,   
<2.$1  
<2.2    

<25; 
=$1866,  
=233$6  
00427A_B570E_XET_Eng2304 4/23/07 8:23 PM Page 34