Electrolux ENN2800BOW - Manuale (Pagina 34)

Ha
Hc
19. Open the appliance door and the
kitchen furniture door at an angle of
90°.
20. Insert the small square (Hb) into guide
(Ha).
21. Put together the appliance door and
the furniture door and mark the holes.
Ha
Hb
8 mm
22. Remove the brackets and mark a
distance of 8 mm from the outer edge
of the door where the nail must be
fitted (K).
Ha
K
8 mm
23. Place the small square on the guide
again and fix it with the screws
supplied.
24. Align the kitchen furniture door and
the appliance door by adjusting the
part (Hb).
Hb
25. Press the part (Hd) on the part (Hb).
Hb
Hd
26. To open the doors, use the sliding
system previously illustrated, or open
one of the two doors by fitting the
small handle supplied as an
accessory.
Do a final check to make sure that:
• All screws are tightened.
www.electrolux.com 34