Atlantis Land WebShare RB300 Wireless N Broadband Router A02-RB-W300N - Manuale (Pagina 31)

ENGLISH
A02-RB-W300N 32
1.5 Default Settings
The Wireless Broadband Router can be configured with your Web browser. The
web browser is included as a standard application in following operation systems,
UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, etc. The product provides a
very easy and user-friendly interface for configuration.
Before Configuration
This section describes the configuration required by LAN-attached PCs that
communicate with the Wireless Broadband Router, either to configure the device, or
for network access. These PCs must have an Ethernet interface installed properly,
be connected to the Wireless Broadband Router either directly or through an
external Switch, and have TCP/IP installed and configured to obtain an IP address
through a DHCP server or a fixed IP address that must be in the same subnet of
the Wireless Broadband Router. The default IP address of the Wireless Broadband
Router is
192.168.1.1 and subnet mask is 255.255.255.0 . The best and easy way is
to configure the PC to get an IP address from the Wireless Broadband Router
(DHCP client).
Please follow the steps below for PC’s network environment installation. First of all,
please check your PC’s network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to MS Windows
relative manuals.
Before you configure this Wireless Broadband Router, you need to know the
following default settings:

Username: admin

Password: admin

IP LAN address: (192.168.1.1), Subnet Mask (255.255.255.0)

IP WAN address: dhcp client

DHCP Server: enable (192.168.1.100-192.168.1.199)

SSSID= N Router , Channel= 6 , WEP/WAP= disable
1.6 IE Configuration
Now open IE, go to Instruments menu, select the Connections tab and select one
of the following options:

Never use remote connection
 Use remote connection if another network connection isn’t available