Atlantis Land DiskMaster F301D - Manuale (Pagina 47)

ENGLISH
DiskMaster 47
Single Hard Drive installation
The following illustrates the layout of the Web-based Configuration Tool
main screen. This page allows you to format the physical hard disks into
DiskMaster. Click on DiskTools ( ) then Basic Mode.
Select the mode for the NAS system to partition and format disks.
Select, in the combo box, the system file (EXT2 / EXT3 / FAT32), EXT 3
is recommend. Press
Format to start formatting (it may require some
times; do not perform other jobs during hard drive formatting). Now please
check that this disk is correctely mounted (check Status=mount).
Once the drive has been formatted, go to LAN Settings e Time Settings
in order to finish the product setup. Click Save Configuration.
When the settings are made, the DiskMaster system starts
formatting the disks. This procedure will destroy all the data
on the disks. Make sure You have backed up any important
data on the disks before the format process. It may require
some times; do not perform other jobs during hard drive
formatting
The DiskMaster supports 128bit loop-AES encryption for
the EXT2 file system. When enabled, the drive has to be
formatted again and you will be prompted for a password
(has to be exactly 20 characters).