HT instruments QUICKLAN6050 - Manuale (Pagina 21)

QuickLAN 6050
EN - 2
1. PRELIMINARY AND SAFETY
WARNING
For your own safety as well as that of the apparatus you are recommended to
follow the procedures described in this instruction manual and carefully read
all the notes preceded by the symbol . No compliance with the Warnings
and/or Instructions may damage the apparatus and/or its components or
injure the operator.
1.1. PRELIMINARY
INSTRUCTION
• Read this instruction manual and the instrument’s one before starting use.
• Any instruction preceded by the caution symbol must be observed in order to avoid
accidents or damages.
• Check that batteries have been placed correctly.
• This product must be used only by qualified personnel practicing applicable safety
precautions.
• Do not effect any measurement under conditions beyond the limits specified in this
manual.
WARNING
Connect the tester only to inactive cables. The input is protected to withstand
low voltages, prolonged connection to active telephone lines and networks
may damage the tester.
1.2. DURING
USE
Carefully read the following recommendations and instructions:
WARNING
If the display shows “LOW BATTERY” interrupt testing and replace batteries.
Never change batteries while instrument is installed on conductors.
• Do not use the instrument if damaged.
• Don’t use QuickLAN 6050 outdoor.
• Don’t use the apparatus at altitudes exceeding 2000 meters.
• Don’t effect any measurement under environmental conditions beyond the limits
specified in paragraph 7.3.1.
• Don’t expose the instrument to water splashes.
1.3. AFTER
USE
• When the measurements are completed switch OFF the instrument.
• Remove batteries when the apparatus remains unused for long periods.