VEGA VEGABAR 65 Foundation Fieldbus - Manuale (Pagina 69)

-
Holds the maximum sensor value. Write access resets to current value. Unit
derives from 'Sensor_range.unit'
-
Write access resets to current value
l
min_peak_sensor_value
-
Holds the minimum sensor value. Write access resets to current value. Unit
derives from 'Sensor_range.unit'
-
Write access resets to current value
l
CAL_POINT_HI
-
Highest calibrated value. For calibration of the high limit point you give the high
measurement value (pressure) to the sensor and transfer this point as HIGH to the
transmitter. Unit derives from 'Sensor_range.unit'
l
CAL_POINT_LO
-
Lowest calibrated value. For calibration of the low limit point you give the low
measurement value (pressure) to the sensor and transfer this point as LOW to the
transmitter. Unit derives from 'Sensor_range.unit'
l
CAL_MIN_SPAN
-
Minimum calibration span value allowed. Necessary to ensure that when calibration is
done, the two calibrated points (high and low) are not too close together. Unit derives
from 'Sensor_range.unit'
l
SCALE_IN
-
Min/max-adjustment: Upper and lower calibrated points of the sensor. Unit derives
from 'Sensor_range.unit'
l
trimmed_value
-
Sensor value after the trim processing. Unit derives from 'Sensor_range.unit'
l
sensor_sn
-
Sensor serial number
l
temperature
-
Process temperature. Selected as input to AIFB by setting 'Channel' = 4. Unit derives
from 'Temperature.unit'
l
temperature_unit
-
Unit code of 'Temperature', 'Max/Min_peak_temperature_value'
-
°C, °F, K, °R
l
max_peak_temperature_value
-
Holds the maximum process temperature. Write access resets to current value.
Unit derives from 'Temperature.unit'
-
Write access resets to current value
l
min_peak_temperature_value
-
Holds the minimum process temperature. Write access resets to current value.
Unit derives from 'Temperature.unit'
-
Write access resets to current value
VEGABAR 65 • Foundation Fieldbus 69
10 Appendice
28260
-IT
-080728