TELEFUNKEN TF-MID9702 - Инструкция (Страница 8)

Operation
8
Operation
the same serial numbers as your device (the
serial number is on the back panel of your
device). To perform the upgrade/replacement
of the OS, follow the instructions posted on the
page model on the manufacturer’s website.
Connections
Connecting to Wi-Fi
• Click the applications menu button (4) in
the top right corner of the main screen, in the
tab “Applications” select “Settings”. In section
“Wireless & Networks” click Wi-Fi to set into the
ON position.
• Connecting to the network: The system
automatically detects available Wi-Fi-networks
and displays their names; select a network you
want to connect and, if necessary, enter the
password. When the connection is successful,
the display shows the Wi-Fi icon (10) in the
notification area. The number of blue sectors of
the icon shows the level of Wi-Fi signal.
To add a Wi-Fi network to the list, click
“Add Network” in the top right corner, then use
the pop-up keypad to enter the network name
and click “Save”.
Connect the external USB-drive
• Connect an external USB-drive with a
microUSB cable to the MicroUSB or USB
(Host) port of this unit. Run the application
“Explorer» and select «USB» to access the
contents of the connected drive.
• You can connect other peripheral USB-
devices (e.g. mouse, keyboard, external hard
drives). It’s enough to connect the peripheral
device to the tablet, the device will be
recognized and connected automatically.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
Connecting the memory card
The tablet PC is equipped with a slot for
memory cards microSD. The maximum
supported card capacity - 32 Gb. After properly
installing a memory card, this device detects
it automatically. To safely remove the memory
card, follow these steps: click the applications
menu button (4) in the top right corner of the
main screen, in the tab “Applications” select
“Settings”, select “Storage”, click on “Eject SD-
card” and complete the transaction. Press on
the card until it clicks, then pull it out of the slot.
Install the card into the slot in the proper
direction and side. For proper operation of the
device, use licensed MicroSD/SDHC cards of
well-known manufacturers. Avoid the use of
counterfeit cards by dubious brands.
Connecting in USB-drive mode
• Connect the USB connector of a PC to
the MicroUSB port of this unit with a microUSB
cable. Click “Turn on USB storage” at the
bottom of the screen. After a while the device
is detected as a removable USB-drive, and you
will have access to the internal memory of the
tablet and the memory card.
• To turn off the tablet connected in USB-
drive node, click “Turn off USB storage” at the
bottom of the screen.
HDMI-out
Connect the HDMI output of the device to
the HDMI input of an external device (e.g., TV)
with a HDMI-cable (not supplied). Now, the
tablet PC can be used as a source of high-
quality digital signal for the connected external
device.
8