Philips HTS5000W - Manuale (Pagina 29)

English
29
3139 115 23842
Playback
Playing pictures or audio files
from USB flash drive or USB
memory card reader
This DVD system able to access and view
the data (JPEG, MP3 or Windows
Media™ Audio) in the USB flash drive or
USB memory card reader.
The USB function can only be activated in
DISC mode.
1
Insert a USB flash drive or USB memory
card reader into the USB port on the
front panel.
➜
A message will appear on the TV for 5
seconds when the device is detected.
Press MODE key to select device
2
Press USB MODE on the remote
control to access the data in the drive.
➜
The content menu appears on the TV.
Select device:
Device 1
Device 2
Device 3
Device 4
Device 5
Device 6
Disc
●
Use 3 4 to navigate within the menu and
select the device you want to access, then
press OK.
●
The device number appear may vary from
different card readers.
●
For card readers, the number of devices
available for selection depends on the
number of cards inserted.
During playback, you can;
●
Press DISC or USB MODE on the
remote control to return to DISC mode.
●
Press Ç before removing the USB flash
drive or USB memory card reader from
the slot.
Compatibility of USB device
●
The USB port does not support the
connection of other USB devices except
USB flash drive or USB memory card
readers.
●
The USB port only supports the playback
of JPEG/MP3/Windows Media™ Audio
files.
●
It is not possible to record from the data
from USB port to this DVD system.
●
Copy protected contents are not
playable.
TIPS: Some discs cannot be played on this DVD system due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
001-051-hts5x-01-Eng50 17/05/05, 1:19 PM 29