Sony STR-DE375 - Manuel (Page 23)

23 GB
Additional Information
Surround sound
Sound that consists of three elements: direct
sound, early reflected sound (early
reflections) and reverberative sound
(reverberation). The acoustics where you hear
the sound affect the way these three sound
elements are heard. These sound elements are
combined in such a way that you can actually
feel the size and the type of a concert hall.
• Types of sound
• Transition of sound from surround
speakers
Test tone
Signal given out by the receiver for adjusting
the speaker volume. The test tone will come
out as follows:
• In a system with a centre speaker
(NORMAL/WIDE/3 STEREO modes)
The test tone is output from the front L
(left), centre, front R (right), and surround
speakers in succession.
• In a system without a centre speaker
(PHANTOM mode)
The test tone is output from the front and
the surround speakers alternately.
Glossary
Centre mode
Setting of speakers to enhance Dolby Pro
Logic Surround mode. To obtain the best
possible surround sound, select one of the
following four centre modes according to
your speaker system.
• NORMAL mode
Select NORMAL mode if you have front
and surround speakers and a small centre
speaker. Since a small speaker cannot
produce enough bass, the bass sound of
the centre channel is output from the front
speakers.
• WIDE mode
Select WIDE mode if you have front and
surround speakers and a large centre
speaker. With the WIDE mode, you can
take full advantage of Dolby Surround
sound.
• PHANTOM mode
Select PHANTOM mode if you have front
and surround speakers but no centre
speaker. The sound of the centre channel is
output from the front speakers.
• 3 STEREO mode
Select 3 STEREO mode if you have front
and centre speakers but no surround
speaker. The sound of the surround
channel is output from the front speakers
to let you experience some of the surround
sound without using surround speakers.
Delay time
Time lag between the surround sound output
from front speakers and surround speakers.
By adjusting the delay time of the surround
speakers, you can obtain the feeling of
presence. Make the delay time longer when
you have placed the surround speakers in a
small room or close to your listening position,
and make it shorter when you have placed
them in a large room or apart from your
listening position.
Direct tuning
Tuning method to let you directly enter a
station’s frequency using the numeric buttons
on the remote. Use this method if you know
the frequency of the station you want.
Dolby Pro Logic Surround
As one method of decoding Dolby Surround,
Dolby Pro Logic Surround produces four
channels from two channel sound. Compared
with the former Dolby Surround system,
Dolby Pro Logic Surround reproduces left-to
right panning more naturally and localizes
sounds more precisely. To take full
advantage of Dolby Pro Logic Surround, you
should have one pair of surround speakers
and a centre speaker. The surround speakers
output monaural sound.
DVD/MULTI CH
These jacks are used to input multi channel
audio signals, allowing you to enjoy 5.1
channel surround sound. Use these jacks to
connect a Dolby Digital decoder, a DVD
player with a built-in Dolby Digital decoder
or TV satellite receiver.
Preset station
A radio broadcasting station that is stored in
memory of the receiver. Once you “preset”
stations, you no longer have to tune in the
stations. Each preset station is assigned its
own preset number, which lets you tune
them in quickly.
Centre
speaker
Surround
speaker (R)
Surround
speaker (L)
Front
speaker (R)
Front
speaker (L)
Centre
speaker
Front
speaker (R)
Front
speaker (L)
Reverberation Early reflections
Direct sound
Direct sound Early
reflections Reverberation Level
Early reflection time Time
3 STEREO
Centre
Front (R) Front (L)
NORMAL/WIDE
Surround
(L, R)
Surround
(L, R)
PHANTOM
Front (L, R)
Centre
speaker
Surround
speaker (R)
Surround
speaker (L)
Front
speaker (R)
Front
speaker (L)
Front
speaker (L)
Front
speaker (R)
Surround
speaker (R)
Surround
speaker (L)