Samsung P200 Manuale d'uso
Pagina 92
91
For Atheros Wireless LAN card
(Optional)
1
Insert the
System Software Media into the CD drive
and install the wireless LAN configuration program
(ACU: Atheros Client Utility).
Select
System Software Media > User Installation
> Wireless LAN Driver ReadMe, click ReadMe and
install the program according to the instructions.
2
Right-click the
wireless LAN configuration
program (
) on the Taskbar and select
Open
Atheros Client Utility.
Alternatively, click
Start > All Programs > Atheros
Client Utility > Atheros Client Utility.
3
In the
Profile Management tab, click Scan to search
for available wireless networks.
4
Select the name of an access point (AP) to connect to
from the network name (SSID) and then click
Activate.
5
Enter a profile name to be used for the connection
and select the security settings of the AP to be
connected to in the
Security tab.
The network authentication, encryption type and
password of an access point are configured through the
access point management program. For the security
information, check the security settings of an access
point or ask your wireless network administrator.
See the following when setting a WEP key.
■
Data encryption (WEP): The IEEE 802.11 WEP
(Wired Equivalent Privacy) standard defines two
levels of encryption, a 64-bit key (this is sometimes
represented by 40bits) and a 128-bit key. When
connecting to an Atheros access point, you can use
the 152-bit key (32 hexadecimal digits or 16 ASCII
characters).
■
Key index: Select the current encryption key index
used by the access point from between 1 to 4.
■
Using an encryption key: Enter 5 (for 64-bit) or 13
(for 128-bit) alpha
Numeric characters (represented
by 0-9, a-z, or A-Z).
6
Click
OK and then OK again in the Profile
Management window.
If the profile is created, the profile appears in the list
in the
Profile Management tab and the connection
is established using the profile.