HP CM1312 MFP Series - Manual (Page 31)

Menu Item Sub-menu item Sub-menu item Description
Product security On
Off
Sets the product-security feature. When the setting is set to
On, you must set a personal identification number (PIN).
Courier font Regular
Dark
Sets Courier font values.
Table 2-6 Service menu
Menu item Sub-menu item Sub-menu item Description
Fax Service Clear saved faxes Clear all faxes in memory.
These include any received
faxes (including non-printed,
non-sent PC upload, and non-
forwarded faxes), unsent faxes
(including delayed faxes), and
any printed faxes that are still in
memory. Deleted faxes cannot
be recovered. For each deleted
item, the fax activity log is
updated.
Run Fax Test Perform a fax test to verify that
the phone cord is plugged in
the correct outlet and that there
is a signal on the phone line. A
fax test report is printed
indicating the results.
Print T.30 trace Now
Never
If error
At end of call
Prints or schedules a report
that is used to troubleshoot fax
transmission issues.
Error correction On
Off
The error correction mode
allows the sending device to re-
transmit data if it detects an
error signal. The default setting
is on.
Fax Service Log The fax service log prints out
the last 40 entries in the fax log.
Cleaning mode Cleans the product when
specks or other marks appear
on printed output. The cleaning
process removes dust and
excess toner from the paper
path.
When selected, the product
prompts you to load plain Letter
or A4 paper in tray 1. Press
OK to begin the cleaning
process. Wait until the process
completes. Discard the page
that prints.
Table 2-5 System setup menu (continued)
ENWW Control-panel menus 19