Send a fax by dialing from a downstream phone, Send a delayed fax – HP CM1312 MFP Series User Manual

Page 147

Advertising
background image

Send a fax by dialing from a downstream phone

Occasionally, you might want to dial a fax number from a telephone that is connected to the same line
as the product. For example, if you are sending a fax to a person whose device is in the manual receive
mode, you can precede the fax with a voice call to let that person know that the fax is coming.

NOTE:

The telephone must be connected to the product "telephone" port (

).

1.

Load the document into the automatic document feeder (ADF) input tray.

NOTE:

You cannot use the flatbed scanner when sending a fax by dialing from an extension

telephone.

2.

Pick up the handset of a telephone that is connected to the same line as the product. Dial the fax
number by using the telephone keypad.

3.

When the recipient answers, instruct the person to start the fax machine.

4.

When you hear the fax tones, press

Start Fax

, wait until Connecting appears on the control-panel

display, and then hang up the telephone or wait on the line until the fax is completed to resume
voice calling.

Send a delayed fax

Use the product control panel to schedule a fax to be sent automatically at a future time to one or more
people. When this procedure is completed, the product scans the document into memory and then
returns to the Ready state.

NOTE:

If the product cannot transmit the fax at the scheduled time, that information is indicated on

the fax error report (if that option is turned on) or recorded in the fax activity log. The transmittal might
not be initiated because the fax-sending call is not answered, or because a busy signal stops the redial
attempts.

If a fax has been scheduled to be sent at a future time but it requires updating, send the additional
information as another job. All faxes that are scheduled to go to the same fax number at the same time
are delivered as individual faxes.

1.

Load the document into the automatic document feeder (ADF) input tray or onto the flatbed
scanner.

2.

On the control panel, press

Fax Menu

.

3.

Use the arrow buttons until Send appears, and then press

OK

.

4.

Use the arrow buttons until Send fax later appears, and then press

OK

.

5.

Use the alphanumeric buttons to enter the time.

6.

If the product is set to the 12-hour time mode, use the arrow buttons to move to A.M. or P.M. Select
A.M. or select P.M., and then press

OK

.

-or-

If the product is set to the 24-hour time mode, press

OK

.

7.

Use the alphanumeric buttons to enter the date, and then press

OK

.

-or-

ENWW

Use fax 135

Advertising
This manual is related to the following products: