Mp2000 air conditioners – Dell MP2000 Manuale d'uso

Pagina 117

Advertising
background image

117

RC GROUP - 149_ItEn.0102

MP2000 AIR CONDITIONERS

Software per condizionatori d'aria a pompa di calore e Roof Top • EPROM CPX....

• Software for heat pump air conditioners and Roof Top

z OFF

Control condensing Pressure OFF
(2000kPa)
Valore di pressione dove l’uscita proporzio-
nale viene riportata al valore 0 Volt in situa-
zione di compressore spento.
Se il compressore è in funzione il valore
dell’uscita proporzionale commuta da
10Volts a zP2max.

zH.Alarm

Maximum pressure value (2500kPa)
Limite di pressione. Quando la pressione
raggiunge questo valore viene bloccato il
compressore e segnalato l’allarme:
AL 05 - Alta pressione compressore 1 (sonda)
oppure:
AL18 - Alta pressione compressore 2 (sonda).

Fig. 64

In figura è indicato l'andamento dell'uscita proporzionale
zY1 con il set zP2max impostato a 7V.

"z ON", "z OFF" e "zH.Alarm" sono valori assoluti,
quindi non si aggiornano automaticamente al variare
di "zPs".

Tra parentesi sono indicati i set di default che possono
essere modificati.

1400

zPs

z (kPa)

2000

1700

2200

2500

5

7

0

3

(V) 10

zP

z OFF

zY1 (10V)

z ON

zH.Alarm

zP2min

zP2max.

zY1

z OFF

Control condensing Pressure OFF
(2000kPa)
Pressure value for which the proportional
output is returned to 0 Volts, when the com-
pressor is OFF.
If the compressor is running, the propor-
tional output value switches from 10 Volts to
zP2max.

zH.Alarm

Maximum pressure value (2500kPA)
Pressure limit. When the pressure reaches
this value, the compressor is locked and the
following alarm is displayed:
Al 05 - Compressor 1: high pressure (probe)
or:
Al 18 - Compressor 2: high pressure (probe)

The figure indicates the trend of proportional output zY1,
when set zP2max is preset to 7V.

"z ON", "z OFF" and "zH.Alamr" are absolute values
and, for this reason, are not updated automatically
based on zPs changes.

The modifiable default sets are indicated in brackets.

Advertising