No load speed torque low, Imiiin(rpm) strong high, Xmnin(rpin) wéak – Panasonic EY6932 Manuale d'uso
Pagina 6
Attenzione! Il testo di questo documento è stato raddrizzato automaticamente. Per vedere il documento originale, puoi usare la "Modalità originale".
BK*iocking function
1. With the trigger switch not engaged
and a screwdriver bit iocked in
place, the tool can be used as a
nianual screwdriver (up to 22.6 Nm,
230 kgf-cm, 199 in-lbs).
There will be a little play in the
chucik, but this is not a malfunction.
2. This feature is handy for tightening
screws that require more torque
than the maximum torque of the
driver (position ^ on the dutch), for
confirming the ^htness of a screw
or to loosen an extremely tight
screw.
Speed Selection
Choose a low or high speed to suit
the use.
The more the speed control trigger is
putted, the higher the speed beoxnes.
No load speed
Torque
LOW
80
-
55
IMiiin(rpm) Strong
HIGH
300
-
20
(XMnin(rpin) Wéak
CAUTION:
• Check the speed selector switch
before use.
• Use at low speed when strong force
is needed during operation.
(Using at high speed while a strong
force is applied may cause a motor
breakdown.)
•Do not operate the speed selector
switch (LOW-HIGH) while pulling on
the speed control trigger. This can
cause the rechargeable battery to
wear quiddy or damage the internal
mechanism of the motor.
•See appendix for 'T^ECOMMENDED
SPEED SELECTION*.
For Appropriate use of Battery
pack
Ni-MH Battery pack EY9201/
EY9231
• Charge the Ni-MH battery fully be
fore storage in order to ensure a
longer service life.
• The ambient temperature range
is between 0*C (32"F) and 40*C
(104“F).
If the battery pack is used when the
battery temperature is below 0*C
(32*F), the tool may fell to function
properly. In that case, charge the
battery until charging is completed
for appropriate functioning of the
battery.
• When battery pack is not in use,
keep it away from other rnetal objects
like: paper dips, coins, keys, nails,
screws, or other small metal objects
that can make a connection from one
terminal to another.
Shorting the battery terminals togeth
er may cause sparks, bums or a lire.
e lAAsAn
***8fr^ .A—IklLAAVpl
.
wvTIOrl W^UIOtlll^ fVIUI Xr IVI IWII I KA0l^
tery pack, make sure the place is
welFventH^ed.
Battery Pack Life
The rechargeable batteries have a
limited life. If operation time becomes
extremely short after recharging,
replace the battery pack with a new
one.
Note:
Use under extremely hot or cold
conditions will reduce operating
capacity per charge.
Charging
Note:
When you charge the battery pack
for the first time, or after prolonged
storage, charge it for about 24
hours to bring the batteries up to
fell capacity.
EY0230
1. Plug the charger into the AC outieL
2. Insert the battery pack firmly into
the charger.
- 6 -