APC AP9475 - Manuale (Pagina 7)

3 InfraStruXure Central Installation Manual
Installation
Installation Instructions
This installation guide provides instructions for trained service technicians installing one or more
systems in a rack. The provided RapidRails rack kit can be installed without tools in any enclosure that
has square holes. One rack kit is required for each system installed in the rack. VersaRails™ rack kits,
which are designed for use with enclosures that have round holes, are available for purchase separately.
Caution: Do not install rack kit components designed for another system. Use only the rack
kit for your system. Using the rack kit for another system may result in damage to the system
and personal injury to yourself and to others.
Before You Begin
Before you begin installing your system in the rack, read the safety instructions on page 2 and in this
section.
Observe the following safety precautions when installing your system in the rack
Caution:
• When installing multiple systems in a rack, complete all of the procedures for
the current system before attempting to install the next system.
• Follow the procedures in this document to protect yourself as well as other
service technicians. Your system is very large and heavy, and proper
preparation and planning are important to prevent injury to yourself and to
others, especially when systems are installed in the top half of the rack.
• Installing systems in a rack without front and side stabilizer feet could cause the
rack to tip over, potentially resulting in bodily injury. Always install the
stabilizer feet of the rack before installing components. The stabilizer feet help
prevent the rack from tipping over when a system or other component is pulled
out of the rack with the slide assemblies fully extended. See the documentation
provided with the rack cabinet for instructions on installing and anchoring the
stabilizer feet.
• After installing systems in a rack, never pull more than one system out of the
rack on its slide assemblies at one time. The weight of more than one extended
system could cause the rack to tip over and cause injury.