Samsung R20plus - Manuale (Pagina 166)

165
Q
I cannot find an AP.
A Verify whether the Wireless LAN LED is on.
If it is turned off, turn it on by pressing the Wireless
LAN On/Off button ( Fn + ).
Q
The Wireless LAN device is operating properly,
but I cannot connect to the Internet or to another
computer.
► This is due to an incorrect configuration, or a
configuration error. Check the following:
A1 If you are using a computer-to-computer (Ad Hoc)
network connection, check that the name of the
configured network (SSID) is correct.
A2 If you are using a network key (encryption key),
you have to use the same network key for an AP
(Access Point) or a computer-to-computer network
(Ad Hoc). The network key of the AP is configured
in the AP management program. Ask your network
administrator or AP manager for more detailed
information.
Wireless Network (WLAN) Related
 Click Start > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections.
 Right-click on the Wireless Network Connections
and select Disable.
Q
When I am connected to a 100Mbps/1Gbps wired
LAN and the computer exits Sleep/hibernation
mode, a message appears informing you of a
connection to a 10Mbps/100Mbps wired LAN.
A When the computer exits standby/hibernate mode,
restoring the network takes about 3 seconds.
When the network is restored, it operates at
100Mbps/1Gbps.